On Sale! Datacom FiberMeter MM 850 1300 Fiber Optic Tester – AAATesters.com
FiberMeter is the most complete system for field testing of premise-wiring multimode and singlemode fiber.
Datacom Textron FiberMeter Fiber-Meter MM Fiber Loss Test Set Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
FiberMeter is the most complete system for field testing of premise-wiring multimode and singlemode fiber. For testing multimode fiber, FiberMeter is the first portable test system to provide automated measurement of optical loss and cable length, Pass/Fail certification against industry standards, detailed certification reports, and the convenience of a built-in talk set. FiberMeter will even test singlemode fiber, providing two separate precision power meters for measuring singlemode optical power and loss.
Multimode Fiber Test Features:
Tests two multimode fibers with one setup.
Automatic bi-directional loss measurements at 850 and 1300 nm
Automated loss budget calculation
Loss margin analysis
Pass/fail certification against cabling standards and network requirements.
Stores up to 2000 link reports.
Uploads test reports to PC for archiving and printing.
Built-in talk set.
FiberMeter will significantly reduce the time you spend setting up and performing tests and quickly pays for itself with productivity improvements. With FiberMeter, pairs of multimode fiber cable are simultaneously measured for bi-directional loss at both 850 and 1300 nm wavelengths with one test setup. Use of FiberMeter for multimode fiber certification can cut testing time up to 80 percent or more compared to manual loss measuring methods. For solo-operator testing, FiberMeter saves additional time spent in
test setup, for tests can be initiated from either end of the fiber link using either FiberMeter handset.
Fiber Certification Based On Industry Standards
With FiberMeter, certification of multimode fiberoptic links is easier
than ever and eliminates the need for interpretation of raw test results. Simply choose from a library of fiber cabling standards, such as TIA 568A or ISO 11801, or
network standards such as 10BASE-FL or Gigabit Ethernet 1000BASE-SX. FiberMeter calculates an optical loss budget (loss Pass/Fail limits) based upon the
specified number of connections and splices in the optical link, plus the measured length.
Autotests on a pair of multimode fibers can be completed in less than 6 seconds. Test results include: Pass/Fail indication, loss measurements at 850 nm and
1300 nm, margin between the measured loss and the established loss budget, cable length, and propagation delay. Up to 1000 Autotest reports may be stored in
each handset (2000 total) along with the test date, selectable company/customer name, and link identification number. Special auto-incrementing Link ID naming
mode facilitates the naming of sequential tests.
Stored Autotest certification reports can be output to a serial printer or uploaded to a PC using the included Report Manager Software (RMS). RMS, a Windows 95/NT 4.0 based utility program provides a simple, intuitive interface for summarizing, sorting and printing test reports.
Test and Talk With One Instrument
LinkTalkTM provides voice communications over the multimode fiber under test. The
integrated talk set keeps you talking even in buildings that prevent use of 2-way radios.
LinkTalk includes built-in microphones, individual earphones, volume controls, and a Call Alert signal. Standard miniature audio jacks on the FiberMeter handsets accept any
Tests Singlemode Fiber (Available December 1999)
Each FiberMeter handset can be used as a precision optical power meter for measuring loss on singlemode fiber at both 1310 nm and 1550 nm wavelengths using a separate laser source (available seperately). Reference levels at both wavelengths may be saved with a push of a button. Test results may be saved for later printing or uploading to a PC using Report Manager Software.
Product Updates and Upgrades
Flash ROM keeps FiberMeter current by allowing updates for new test standards and requirements. Product firmware updates are made available periodically on the Datacom Textron Web site, and are easily downloaded to the FiberMeter handsets from a PC using the supplied RMS software.
Ra Series of Fiberoptic Testers
FiberMeter is part of the Ra Series of fiberoptic testers, a complete range of innovative products for testing, certifying and maintaining fiberoptic cabling. For more information on other Ra Series fiber optic testers, contact Datacom Textron or visit the Datacom Web site.
Supported Cabling and Network Standards
TIA 568A Backbone
TIA 568A Horizontal
ISO 11801/EN50173 Backbone
ISO 11801/EN50173 Horizontal
1000BASE-SX (Gigabit Ethernet)
1000BASE-LX (Gigabit Ethernet)
850 nm, 1300 nm
Multimode Fiber Length
Range: 1-6600 ft (1-2000 m)
Resolution: 1 ft (1 m)
Accuracy: 0-1000 ft (0-305 m): +/- 2 ft (0.6 m) +/- 2% +/- IOR Uncertainty
1001 – 6600 ft (305 m – 2000 m): +/- 2 ft (0.6 m) +/- 3% +/- IOR Uncertainty
Multimode Fiber Propagation Delay
Range: 10-10,000 ns
Dynamic Range: +3 dBm to -50 dBm
Resolution: 0.01 dB/dBm
Accuracy: +/- 0.3 dB @ -20 dBm
Indium Gallium Arsenide (InGaAs)
Connectors (each handset)
ST Connectors (2)
Physical Characteristics (each handset)
Dimensions: 31 x 9.9 x 6.3 cm (12.0 x 3.9 x 2.5 in)
Weight: 1.08 kg (2 lb. 6 oz.)
Power (each handset)
Batteries: 8 AA alkaline batteries
Nickel Metal Hydride (NiMH) rechargeable battery pack (optional)
Adjustable power-saving Òpower-downÓ time
Low battery indicator
Display (each handset)
Backlighted, graphical LCD
Operating Humidity (non-condensing): 10% to 90%
Operating Temperature Range: 0 to 50¡ C (32 to 122¡F)
Storage Temperature Range: -20 to 60¡ C (4 to 140¡F)
(2) FiberMeter Handsets
(2) MM FiberCat Adapters
(2) Handset Impact Cases with Straps
(2) LinkTalk Headsets
(2) MM ST-to-ST Fiber Patch Cables
(2) AC Adapters
Report Manager Software
PC Interface Cable
Hard Carrying Case
Hard Carrying Case Keys